Bambu Lab AMS HUB
59,90€ ME ΦΠΑ
To Bambu Lab AMS Hub είναι μια συσκευή διασύνδεσης εως 4 συστημάτων AMS Multi Material System για επέκταση δυνατοτήτων χρήσης υλικών στον Bambulab 3D Printer σας! Αντικαθιστά το αρχικό Buffer που δέχεται 1 μόνο AMS (4 channels) και μπορεί να δεχτει εως 4 AMS (16 channels).
Συμβατό με όλους τους P1P / P1S και Χ1 Carbon FDM τρισδιάστατους εκτυπωτές της Bambulab!
Σε απόθεμα
Bambu Lab AMS HUB is used to expand the number of AMS connected to Bambu X1/P1 series printers from 1 AMS unit(4 channels) to a maximum of 4 AMS units(16 channels) to improve the refueling speed across your multiple AMS units and support the redundancy of a buffered signal.
*The picture is for reference only, try to place the AMS on the left side of the AMS Hub when actually printing, otherwise the filament in the PTFE tube is easy to get stuck.
Expand Your AMS Options
The built-in buffer of the printer can only be connected to 1 AMS. When replaced with AMS Hub, the printer will be able to connect up to 4 AMS.
How-to video
Check out our Wiki article : Connect AMS Hub and Multi-AMS
Installation
- Install the AMS Hub on the back of the printer, replacing the Filament buffer if you have one, and use the matching Bambu 4 Pin cable to connect to the printer, use the Bambu 6 Pin cable to connect to the first AMS, then continue to use the 6-pin cable to connect the remaining AMS in series.
- Use the matching PTFE Tube to connect the AMS Hub and the air tube connector on the back of the printer, the tube should pass between the 4-pin plug and the spool holder to reduce the resistance.
- According to the placement of the AMS and the printer, you can choose the appropriate length of the PTFE tube to connect the AMS and the AMS Hub. The tube should be as short as possible and avoid winding to reduce the feeding resistance.
What’s in the box
AMS Hub
Bus Cable – (2x)6pin（1.5m）
PTFE Tube
M3*28 Screw (x2)
Bambu Lab AMS Hub Tech Specs
| Product Size |
140*60*22 mm
|
| Package Size |
235*167*40 mm
|
| Product Weight | 84 g |
| Gross Weight | 321 g |
| Material | Plastic, metal, printed circuit board |
| Input | 24V 3A |
| Color | Gray |
You may also like...
Bambu Cool Plate
13,90€ – 29,90€ ME ΦΠΑ
eSUN ePLA-LW filament 1kg
34,90€ ME ΦΠΑ
eSUN PLA+ Filament 1KG
18,90€ ME ΦΠΑ
Bambu Lab AMS – Automatic Material System
319,00€ ME ΦΠΑRelated Products
Raise3D Pro2 Hotend
109,00€ ME ΦΠΑ
Raise3D PRO3 Hyper Speed Upgrade Kit
620,00€ ME ΦΠΑ
eSUN eVacuum Kit
17,90€ ME ΦΠΑ
Zortrax M200/M300 Hotend V2/V3
49,90€ – 89,90€ ME ΦΠΑ
Replacement spare LCDs
119,90€ – 279,90€ ME ΦΠΑ
Premium Zortrax M200 Side Covers
99,00€ ME ΦΠΑ
Zortrax HEPA Cover M200/Μ300
239,90€ – 279,90€ ME ΦΠΑ
Slap Resin Mat
14,90€ ME ΦΠΑ
