eSUN ePLA-LW filament 1kg

34,90 ME ΦΠΑ

Availability: In Stock
SKU: EPLALW

 

eSUN PLA-LW filament στο 3DHUB!

Ειδικό αναλώσιμο της eSUN που σχεδιάστηκε για χρήση σε τηλεκατευθηνόμενα αεροπλάνα και cosplay λόγω της ιδιότητάς του να συμπεριφέρεται σαν αφρός, φουσκώνοντας κατά την εκτύπωση, δίνοντας έτσι μάζα με μικρότερο τελικό βάρος!

Ο βαθμός διόγκωσης είναι 220%, ελέγχεται από τη θερμοκρασία εκτύπωσης και αυτό σημαίνει πως ένα καρούλι ePLA-LW μπορεί να χρησιμοποιηθεί όσο 2.2 καρούλια κανονικού PLA! Επίσης αυτή η διόγκωση εξαφανίζει εντελώς τις γραμμές εκτύπωσης!

Για την εκτύπωση ρυθμίζετε τη θερμοκρασία μεταξύ 210-270°C για να επιτύχετε την επιθυμητή διόγκωση και μπορείτε να ρίξετε το flow rate εως και στο 45% για να επιτύχετε πολύ ελαφρυά μοντέλα!

Διάμετρος: 1.75mm ± 0.05mm
Βάρος: 1000g

Δοκιμάστε και τα υπόλοιπα ESUN υλικά! ABS+/PETG/PLA+/κλπ

Clear
Credit module tbi bank 1.1.1

eSUN PLA-LW Filament στο 3DHUB!

eSUN PLA-LW Filament στο 3DHUB!

eSUN PLA-LW filament was specially developed for model aircraft construction. The interlayer adhesion is stable, and the foaming speed and strength can be controlled by adjusting the printing temperature. Using active foam technology to create lightweight, low-density PLA parts, the foam volume ratio is 220% and the density is only 0.54 g/cm³. Foaming makes the layer pattern almost invisible, and the surface of the model is matte and fine. At the same model and speed, the lightweight PLA allows the model aircraft to have less wing load and stall speed, which can greatly improve the performance of the model aircraft.

Main features of eSUN ePLA-LW

  • Ideal for model aircraft construction
  • Stable interlayer adhesion through active foam technology
  • Barely visible print layers
  • Low density of 0.54 g/cm³
  • Matt surface
  • Easy to print


 

Note: Please make sure to print the first print layer at the same speed as the rest of the model.

Since most printers with PTFE hotends should not be operated above 250 °C for a long time, always pay attention to the maximum operating temperature of your 3D printer, as long-term printing above this temperature can lead to blocking.

Yellowing of printed parts after high-temperature foaming is normal. Reducing the print temperature can help.

Since the ePLA-LW foams continuously in the melting chamber of the high-temperature nozzle, the retraction basically does not work. Stringing can therefore occur. It is recommended to print the RC models in vase mode to reduce the effect of stringing.

The foam ratio of the material depends on the temperature, the printing speed and the size of the melt cavity of the nozzle. Be sure to compare the wall thickness of the model design according to your own printing situation, and adjust the extrusion rate, temperature, speed and other parameters.

Product information & technical details

Item no.: ESUN-ePLA-LW175N1
Manufacturer No.: ePLA-LW175N1
Manufacturers: eSUN
Content: 1.000 g
Diameter: 1,75 mm
Product types: PLA Filaments
Filament colour: Natural
Net weight: 1000 g
Recommended processing temperature: 190 – 270°C
Recommended bed temperature: 45 – 60°C

Επιπλέον πληροφορίες

Technology

Filament Type

Filament Brand

Χρώμα

Natural, Black [OUT OF STOCK]

eSUN ePLA-LW filament 1kg

eSUN ePLA-LW filament 1kg